Tel/WhatsApp
0086-135 2669 2320
Our waste tyre pyrolysis plant adopts low-temperature pyrolysis technology and keep the pyrolysis degree at average 380 degree.
DOING waste tyre pyrolysis plant was being heated
Waste tyres are mainly composed of rubber, carbon black and other organic components. After thermal pyrolysis, rubber and other organic components are cracked into oil gas. The residual solid substances after cracking include recovered carbon black filler, inorganic ash and steel wire. Waste tyre begins to decompose at about 290°, and the pyrolysis ended at about 570°.
The final products from waste tyre pyrolysis plant
Good temperature control is the best guarantee for higher oil output and safety of the waste tyre pyrolysis plant. If temperature too low, waste tyre cannot get fully pyrolyzed, then less oil produced. If temperature too high, the waste tire pyrolysis oil gas will run very fast out of the pyrolysis plant cooling system without being condensed, so the oil output cannot be higher either.
Pyrolysis plant cooling system
Our waste tyre pyrolysis plant is equipped with digital thermometer for our customer to do the pyrolysis temperature control accordingly.
Digital thermometer of our waste tyre pyrolysis plant
In our waste pyrolysis plant operation manual, we mention very clearly the pyrolysis temperature in different pyrolysis stage so that our pyrolysis plant user can well control the temperature and get good oil output.
Except waste tyre, our waste tyre pyrolysis plant can also process other kinds of rubber and various kind of plastics, different raw material, the pyrolysis temperature will be a bit different, so the pyrolysis temperature of our waste pyrolysis plant also varies. For more details, you are welcome to check with us by sending the enquiry.
