Contact us

    Projects Case

  • 8 sets 12T waste tire pyrolysis machine were installed in Shanxi, China
  • 10T waste plastic and tire pyrolysis plant project in Colombia
  • One set 10T waste tyre pyrolysis machine was installed Mumbai, India
  • Congratulation of 12T Waste Tyre Recycling Pyrolysis Plant Assembled in Guinea

What is pyrolysis of plastic ?

Date:2018-08-02 10:27:12 / Pyrolysis machine FAQ/ Give me the price/Leave a message


pyrolysis of plastic

Plastic pyrolysis principle


Pyrolysis is the process of thermally degrading long chain polymer molecules into smaller, less complex molecules through heat. The process requires intense heat with shorter duration and in absence of oxygen, able to produce high amount of liquid oil up to 80 wt% at moderate temperature around 500⁰C.


pyrolysis of plastic

Waste plastic pyrolysis plant


We can get three major products through the pyrolysis of plastic, plastic pyrolysis oil, gas and carbon black, which are valuable for industries especially production and refineries. The plastic pyrolysis oil have high calorific value that could be used as an alternative fuel in multiple applications such as furnaces, boilers, turbines and diesel engines without the needs of upgrading or treatment.


pyrolysis of plastic

Plastic pyrolysis oil applications


In addition, pyrolysis of plastic is also very flexible since the process parameters can be manipulated to optimize the product yield based on preferences. Parameters play major role in optimizing the product yield and composition in pyrolysis of plastic. There are several parameters that influence liquid oil production in pyrolysis of plastic.


1.In pyrolysis of plastics, temperature is one of the most significant operating parameters since it controls the cracking reaction of the polymer chain. Different plastics have different degradation temperature depending on the chemical structure. For common plastics such as PE, HDPE, LDPE, PP and PS, the thermal degradation temperature started at 350⁰C except for PVC which the degradation started at lower temperature of 220⁰C. However, with the usage of catalyst in the pyrolysis, the optimum temperature could be lowered and higher liquid yield was obtained.


pyrolysis of plastic

DOING plastic pyrolysis reactor


2. Besides temperature, right reactor selection for the pyrolysis of plastic is also crucial to increase efficiency of the reaction towards achieving the final desired product. The reactor we DOING manufacture is strictly according to the standard of pressure vessels(boiler grade). The round-shape reactor head has very strong tension and good connection with the reactor body, thus could not be cracked under high pressure and high temperature.


pyrolysis of plastic

Accurate calculation system and safety device of DOING waste plastic pyrolysis plant


3. Furthermore, pressure and residence time also governed the performance of pyrolysis process. Pressure and residence time are both temperature dependence factors that may have potential influence on product distribution of the plastic pyrolysis at lower temperature. Higher pressure increased the product yield and affected the molecular weight distribution for both liquid and gaseous products. DOING plastic pyrolysis plant is equipped with an accurate calculation system to ensure that the plastic is fully cracked in the reactor, and fully converted into oil and gas, thus the oil yield is high.


pyrolysis of plastic

Plastics to fuel oil pyrolysis


The sustainability of the plastic pyrolysis process is unquestionable since the amount of plastic wastes available in every country is reaching millions of tons. With the pyrolysis of plastic, the waste management becomes more efficient, less capacity of landfill needed, less pollution and also cost effective. Moreover, with the pyrolysis of plastic to decompose plastic into valuable energy fuel, the dependence on fossil fuel as the non-renewable energy can be reduced and this solves the rise in energy demand.



Send us a message

If you wanna to get more details about What is pyrolysis of plastic ? you can send E-mail to market@doinggroup.com. You can consult our professional engineer and specialized sales team with leave a message in below form.We will contact with you ASAP.You also can visit our factory in Henan,China.Get Detailed address.

Send message
  • Chat Online
  • Tel/WhatsApp
    0086-135 2669 2320
  • Leave Message
  • WeChat