Waste oil recovery refining process plant
Waste oil has two categories according to the source. One kind is transmission oil of machinery operation, this kind of waste oil has been added with addition agent and impurity. Another is lubricating oil discharged by all kind of vehicles such as car, truck, bus and ship, etc. At present, along with increasing of vehicles, there is a large amount of waste oil need be recycled. Many people have found used oil disposal business opportunities.
Waste oil recovery refining process plant for sale from Doing group can dispose of waste oil.
Waste oil recovery refining process plant working process
1. Pump raw material into distillation reactor by oil pump. Then close the feeding inlet to totally sealed. (Continuous plant adopts automatic feeding device);
2. Use coal/wood/natural gas/fuel oil/electricity to heat the reactor, and the liquid oil will slowly become oil gas, which will be liquefied into fuel oil by the cooling pipe and condensers and then go into oil tank. For getting higher quality diesel, you are required to control the temperature over 150 Celsius degrees. When the temperature decreases to below 150 Celsius degrees, the gasoline will be cooled out;
3. Some gases like Methane, Ethane, Propane, Butane cannot be liquefied will be recycled into the furnace for heating the reactor;
4. It will produce some smoke when fuel materials are burnt. The smoke will be processed by dedusting system completely;
5. The exhaust gas will go into the chimney sucked by draft fan, before emission the exhaust gas will become steam, no pollution.