Tel/WhatsApp
0086-135 2669 2320
The theory of tire pyrolysis machine is through pyrolysis, let solid tire become oil gas under high temperature,then by recycling water, cooling down oil gas to liquid oil. So duri...
Is your pyrolysis reactor protection against corrosion?what do you expect rate of reduction in your pyrolysis reactor steel thickness?It's accroding to raw material, If waste t...
If tires no bigger than 1.4meters,you don't need to cut the tires.The whole tires could be put into the reactor,by auto feeder.The plastic also could be put into the reactor by...
We have pressure gage installed,and we will set a certain number,if the pressure is higher,there will be alarm on the control panel,it will first alarm,if not people,there is a val...
Yes,we have control system,you could monitor the whole systemby controling system by bottons.Tire pyrolysis machine Control system
In side the reactor,the temperature is very high,we put a temperature thermal to test the temperature of oil gas,controled at 240°C is best,the quallity of oil is best.
How will the reactor remain in an oxygen free state during normal production operation?How is oxygen prevented from entering the duct work?At the begining,inside the reactor,there ...
Yes,we have vacuum device,but it is notinside the reactor,it is part of the system,which produces negative pressure to ensurethe safety of the whole process,also improve the workin...
We use auto-feeder to feed the tires/plastic into reactor.The auto-feeder is of 60ton hydraulic pressure. Here is the picture of our auto-feeder.Auto-feeder
