Waste to energy technical support

Pyrolysis plant:HOMEPAGE » Pyrolysis Machine Products » Pyrolysis machine FAQ»How to build waste to energy pyrolysis plant?

How to build waste to energy pyrolysis plant?

Waste to energy pyrolysis plant is a green way to dispose waste tires, plastics and used rubbers, with the help of this plant, instead burning or burying, you can extract crude oil,carbon black and steel wire from waste tires, plastic and used rubbers. You can sell them for money.This is good for you and the environment.

Waste to energy pyrolysis plant

How to build Waste to energy pyrolysis plant?

Preparation of raw material:
The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by Waste to energy pyrolysis plant. The following are details:
Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should dry it firstly. Methods as follows:

  1. Dry in the sun: if you have enough area, you could dry the material in the sun. You should often stir it.
  2. Squeeze water from material using a large power extruder.
  3. Dry the material using a spin-drier.

If the raw material is waste tire and its diameter is over 1.4 meter, should cut the inner ring firstly.The area space need of pyrolysis plants. It is usually 33 feet width and 131 feet length for the 10 tons capacity machine.

Prev Λ What can we get from waste plastic?
NEXT ν Waste/used oil recycling

If you wanna to get more details about How to build waste to energy pyrolysis plant? or the cost of related pyrolysis machine , you can send E-mail to market@doinggroup.com. You can consult our professional engineer and specialized sales team with leave a message in below form.We will contact with you ASAP.You also can visit our factory in Henan,China.Get Detailed address.