The work process of crude oil extracting from waste plastic/tires/tyres with refining equipment can be divided into five steps, which are melting the waste material (waste plastic, tires/tyres), pyrolysis, cooling, precipitation, split-flow.
we can know clearly through the following aspect:
Firstly, the raw material is put into furnace, then seal the feed inlet system.
Secondly, burn the fuel material (coal, or wood, or natural gas, oil) in the combustion system. The reactor will slowly heat ,when the temperature reach around 250 degree celsius, it will produce oil gas .oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil. The gas which can not be liquid under normal pressure, will be designed to back to combustion system to instead the fuel material to burn the reactor. That can save energy very much. After finished oil produce, the temperature of reactor will be down, in same time, carbon black will be discharged automatically.
Lastly, when the temperature of reactor descends 100 degree celsius, worker could open the door of reactor to discharge of steel wire. Then can start to another batch working.
If you wanna to get more details about The principle of crude oil extracting from waste plastic with refining equipment you can send E-mail to firstname.lastname@example.org. You can consult our professional engineer and specialized sales team with leave a message in below form.We will contact with you ASAP.You also can visit our factory in Henan,China.Get Detailed address.